Basic Info.
Resistance
Sensitive Resistor
Function for Resistance
Protective Resistor
Installation
DIP Resistor
Material
Ceramic and Metal
Quantity
Single Connection
Resistance change scale
Log Scale
Application
Medical Apparatus and Instruments
Transport Package
500 Pieces Per Bag
Origin
Donggugan Guangdong China
Product Description
NTC thermistor
1.Power NTC thermistor introduction
Power NTC thermistor has an excellent non-linearity characteristic for resistance and temperature , its appliance is an easy and effectice method to protect electric device through surge current restrainning .
2.Resistance and temperature characteristic of power NTC thermistor
Power NTC thermistor can effectively restrain the surge current in the circuit ,and its resistance will fall down to a very small state through the current durative and the power consumption is commonly ignored , the coltage will be borne by the rear divice so that to guarantee the normal function of circuit .
The intergradations metal oxide as the main material , power NTC thermistor is a kind of semi-conductive component manufactured by the ceramic productive process technique ,it belongs to the category of negative thermistor series .
3.Range of application
Power NTC thermistor are widely applied in switch power ,conversion power supply ,UPS power and electronic rectifier ,heater ,etc , it has a protected function for RT ,display ,lighting device and circuit of different electronic equipments .
4.Nomenclature explanation
1. Zero-power resistance (R25) : the measured resistance of power NTC thermistor under the condition of 25ºC with a rated zero-power .
2. The maximum steady current (Imax):the maximum current that could be allowed connecting with the power NTC thermistor under the rated current condition (virtual value)
5.Characteristic of power NTC thermistor
1.Meet the environmental requirements of ROHS.
2.Low cost and quality stability.
3.Power NTC thermistors are in small size but with a high power that to restrain the surge current .
4.Powe NTC thermistors possesse the electronic character of fast reflection ,high reliability and long-life time for use.
5.The material has a high constant as B value with small remained resistance .
6.Power NTC thermistors have a large application range integrate products series .
6.Characteristic of power NTC thermistor
1.The muaximum working current(Imax)>actual operating current in the power loop.
2.Power resistor nominal resistance R: R≥1.414E/Im.
E:line voltage
Im:surge current for power Im=100 times the working current ; for the heating wire , heater circuit Im=30 times operating current.
3. The bigger the B value is , the less the residual resistance ,the lower the temperature rise.In general , the bigger the product of the time constant and dissipation coefficient ,the larger the heat capacity of resistor , the stronger the ability to suppress the surge current of resistor .
7.Recognized standards and certificates
Recognized organization | Recognized marks | Recognized standard | Certificates series No |
UL CUL | | | E361907 |
8.Dimensions
Specifications | Diameter Dmax | Thickness | Lead space F±1 | Lead diameter d±0.05 | Straight lead Lmin |
DRMΔD-5 | 6.5 | 4.0 | 5.0/2.5 | 0.55/0.45 | 25 |
DRMΔD-7 | 8.5 | 4.5 | 5.0 | 0.55 | 25 |
DRMΔD-9 | 10.5 | 5.0 | 7.5/5.0 | 0.75/0.55 | 25 |
DRMΔD-11 | 12.5 | 5.0 | 7.5/5.0 | 0.75 | 25 |
DRMΔD-13 | 14.5 | 6.0 | 7.5 | 0.75 | 25 |
DRMΔD-15 | 16.5 | 6.5 | 7.5 | 0.75 | 25 |
DRMΔD-20 | 21.5 | 7.0 | 10/7.5 | 1.0 | 25 |
DRMΔD-25 | 27.5 | 8.0 | 10 | 1.0 | 25 |
9.Packing type and quantity
Bulk packing with a lable of technical specification inside .
Size | DRM ΔD-5 | DRM ΔD-7 | DRM ΔD-9 | DRM ΔD-11 | DRM ΔD-13 | DRM ΔD-15 | DRM ΔD-20 | DRM ΔD-25 |
MPQ (pcs/bag) | 1000 | 1000 | 500 | 500 | 250 | 250 | 100 | 50 |
11.Main technical parameters of D-5
type | Rated zero-power resistance R25 (Ω) | residual resistance under maximum steady-state current at 25ºC (Ω) | B25/85 (k) | Current (A) | Max load capacitance (uf) 120VAC | Max load capacitance (uf) 240VAC | Thermal time constant (s) | Dissipation factor (mw/ºC) | Temperature Range (ºC) | Approvals UL/CUL |
Maximum steady-state current at 25ºC Imax | Iss |
5D-5 | 5 | 0.5841 | 2700 | 1 | 1 | 150 | 39 | <18 | >6 | -40 ~ +150 | √ |
10D-5 | 10 | 1.039 | 2700 | 0.7 | 0.7 | 150 | 39 |
15D-5 | 15 | 1.53 | 2800 | 0.6 | 0.6 | 150 | 39 |
20D-5 | 20 | 2.02 | 2800 | 0.6 | 0.6 | 150 | 39 |
22D-5 | 22 | 2.06 | 2800 | 0.6 | 0.6 | 150 | 39 |
30D-5 | 30 | 2.227 | 2800 | 0.5 | 0.5 | 150 | 39 |
33D-5 | 33 | 2.436 | 2800 | 0.5 | 0.5 | 150 | 39 |
50D-5 | 50 | 2.653 | 3000 | 0.4 | 0.4 | 150 | 39 |
60D-5 | 60 | 2.753 | 3000 | 0.3 | 0.3 | 150 | 39 |
12.Main technical parameters of D-7
type | Rated zero-power resistance R25 (Ω) | residual resistance under maximum steady-state current at 25ºC (Ω) | B25/85 (k) | Current (A) | Max load capacitance (uf) 120VAC | Max load capacitance (uf) 240VAC | Thermal time constant (s) | Dissipation factor (mw/ºC) | Temperature Range (ºC) | Approvals UL/CUL |
Maximum steady-state current at 25ºC Imax | Iss |
3D-7 | 3 | 0.206 | 2700 | 3 | 3 | | | <30 | >9 | -40 ~ +150 | √ |
5D-7 | 5 | 0.2864 | 2700 | 2 | 2 | 180 | 47 |
8D-7 | 8 | 0.7353 | 2800 | 1 | 1 | 180 | 47 |
10D-7 | 10 | 0.7885 | 2800 | 1 | 1 | 180 | 47 |
12D-7 | 12 | 1.18 | 2800 | 0.7 | 0.7 | 390 | 100 |
16D-7 | 16 | 1.56 | 3000 | 0.7 | 0.7 | 390 | 100 |
20D-7 | 20 | 1.9877 | 3000 | 0.6 | 0.6 | 390 | 100 |
22D-7 | 22 | 1.95 | 3000 | 0.6 | 0.6 | 390 | 100 |
30D-7 | 30 | 3.7059 | 3000 | 0.5 | 0.5 | 390 | 100 |
33D-7 | 33 | 3.8878 | 3000 | 0.2 | 0.2 | 390 | 100 |
50D-7 | 50 | 6.465 | 3000 | 0.3 | 0.3 | 390 | 100 |
13.Main technical parameters of D-9
type | Rated zero-power resistance R25 (Ω) | residual resistance under maximum steady-state current at 25ºC (Ω) | B25/85 (k) | Current (A) | Max load capacitance (uf) 120VAC | Max load capacitance (uf) 240VAC | Thermal time constant (s) | Dissipation factor (mw/ºC) | Temperature Range (ºC) | Approvals UL/CUL |
Maximum steady-state current at 25ºC Imax | Iss |
2.5D-9 | 2.5 | 0.1397 | 2700 | 4 | 4 | | | <35 | >11 | -40 ~ +170 | √ |
3D-9 | 3 | 0.1456 | 2700 | 4 | 4 | 270 | 68 |
4D-9 | 4 | 0.2541 | 2700 | 3 | 3 | 270 | 68 |
5D-9 | 5 | 0.2641 | 2700 | 3 | 3 | 270 | 68 |
6D-9 | 6 | 0.3582 | 2700 | 2 | 2 | 270 | 68 |
7D-9 | 7 | 0.3265 | 2800 | 2 | 2 | 390 | 100 |
8D-9 | 8 | 0.3731 | 2800 | 2 | 2 | 390 | 100 |
10D-9 | 10 | 0.398 | 2800 | 2 | 2 | 390 | 100 |
12D-9 | 12 | 0.989 | 2800 | 1 | 1 | 390 | 100 |
16D-9 | 16 | 1.041 | 3000 | 1 | 1 | 390 | 100 |
20D-9 | 20 | 1.173 | 3000 | 1 | 1 | 560 | 150 |
22D-9 | 22 | 1.2346 | 3000 | 1 | 1 | 560 | 150 |
30D-9 | 30 | 1.32 | 3000 | 1 | 1 | 560 | 150 |
33D-9 | 33 | 1.431 | 3000 | 1 | 1 | 560 | 150 |
50D-9 | 50 | 1.48 | 3100 | 1 | 1 | 560 | 150 |
60D-9 | 60 | 1.641 | 3100 | 0.8 | 0.8 | 560 | 150 |
80D-9 | 80 | 2.187 | 3200 | 0.8 | 0.8 | 270 | 68 |
120D-9 | 120 | 3.281 | 3200 | 0.8 | 0.8 | 270 | 68 |
200D-9 | 200 | 5.469 | 3200 | 0.5 | 0.5 | 270 | 68 |
14.Main technical parameters of D-11
type | Rated zero-power resistance R25 (Ω) | residual resistance under maximum steady-state current at 25ºC (Ω) | B25/85 (k) | Current (A) | Max load capacitance (uf) 120VAC | Max load capacitance (uf) 240VAC | Thermal time constant (s) | Dissipation factor (mw/ºC) | Temperature Range (ºC) | Approvals UL/CUL |
Maximum steady-state current at 25ºC Imax | Iss |
1D-11 | 1 | 0.1205 | 2600 | 5 | 5 | | | <55 | >13 | -40 ~ +170 | √ |
1.5D-11 | 1.5 | 0.126 | 2600 | 5 | 5 | | |
2.5D-11 | 2.5 | 0.126 | 2700 | 5 | 5 | 270 | 68 |
3D-11 | 3 | 0.1263 | 2700 | 5 | 5 | 270 | 68 |
4D-11 | 4 | 0.2005 | 2700 | 4 | 4 | 820 | 220 |
5D-11 | 5 | 0.2052 | 2700 | 4 | 4 | 820 | 220 |
6D-11 | 6 | 0.2977 | 2700 | 3 | 3 | 1200 | 330 |
7D-11 | 7 | 0.2824 | 2800 | 3 | 3 | 1200 | 330 |
8D-11 | 8 | 0.2591 | 2800 | 3 | 3 | 1200 | 330 |
10D-11 | 10 | 0.2676 | 2800 | 3 | 3 | 1200 | 330 |
12D-11 | 12 | 0.3467 | 2800 | 2 | 2 | 1200 | 330 |
15D-11 | 15 | 0.485 | 3000 | 2 | 2 | 1200 | 330 |
16D-11 | 16 | 0.5 | 3000 | 2 | 2 | 1200 | 330 |
20D-11 | 20 | 0.59 | 3000 | 2 | 2 | 1200 | 330 |
22D-11 | 22 | 0.5903 | 3000 | 2 | 2 | 1200 | 330 |
25D-11 | 25 | 0.602 | 3000 | 1.5 | 1.5 | 1200 | 330 |
30D-11 | 30 | 0.722 | 3000 | 1.5 | 1.5 | 1200 | 330 |
33D-11 | 33 | 0.795 | 3000 | 1.5 | 1.5 | 1200 | 330 |
47D-11 | 47 | 1.165 | 3200 | 2 | 2 | 1200 | 330 |
50D-11 | 50 | 1.241 | 3200 | 2 | 2 | 1200 | 330 |
60D-11 | 60 | 1.489 | 3200 | 1 | 1 | 1200 | 330 |
80D-11 | 80 | 1.986 | 3200 | 1 | 1 | 1500 | 390 |
120D-11 | 120 | 2.979 | 3200 | 0.8 | 0.8 | 1500 | 390 |
15.Main technical parameters of D-13
type | Rated zero-power resistance R25 (Ω) | residual resistance under maximum steady-state current at 25ºC (Ω) | B25/85 (k) | Current (A) | Max load capacitance (uf) 120VAC | Max load capacitance (uf) 240VAC | Thermal time constant (s) | Dissipation factor (mw/ºC) | Temperature Range (ºC) | Approvals UL/CUL |
Maximum steady-state current at 25ºC Imax | Iss |
1.3D-13 | 1.3 | 0.0889 | 2700 | 7 | 7 | 180 | 47 | <70 | >13 | -40 ~ +200 | √ |
1.5D-13 | 1.5 | 0.0895 | 2700 | 7 | 7 | 180 | 47 |
2.5D-13 | 2.5 | 0.1079 | 2700 | 6 | 6 | 270 | 68 |
3D-13 | 3 | 0.145 | 2700 | 6 | 6 | 270 | 68 |
4D-13 | 4 | 0.1456 | 2700 | 5 | 5 | 390 | 100 |
4.7D-13 | 4.7 | 0.1469 | 2800 | 5 | 5 | 390 | 100 |
5D-13 | 5 | 0.1497 | 2800 | 5 | 5 | 560 | 150 |
6D-13 | 6 | 0.2111 | 2800 | 4 | 4 | 560 | 150 |
7D-13 | 7 | 0.232 | 3000 | 4 | 4 | 1200 | 330 |
8D-13 | 8 | 0.2746 | 3000 | 4 | 4 | 1200 | 330 |
10D-13 | 10 | 0.2792 | 3000 | 4 | 4 | 1200 | 330 |
12D-13 | 12 | 0.4833 | 3000 | 3 | 3 | 1200 | 330 |
15D-13 | 15 | 0.4867 | 3100 | 3 | 3 | 1200 | 330 |
16D-13 | 16 | 0.4545 | 3100 | 3 | 3 | 1200 | 330 |
18D-13 | 18 | 0.511 | 3200 | 3 | 3 | 1200 | 330 |
20D-13 | 20 | 0.568 | 3200 | 3 | 3 | 1200 | 330 |
22D-13 | 22 | 0.625 | 3200 | 3 | 3 | 1200 | 330 |
25D-13 | 25 | 0.581 | 3200 | 2 | 2 | 1200 | 330 |
30D-13 | 30 | 0.696 | 3200 | 2 | 2 | 1200 | 330 |
33D-13 | 33 | 0.765 | 3200 | 2 | 2 | 1200 | 330 |
47D-13 | 47 | 1.091 | 3200 | 2 | 2 | 820 | 220 |
50D-13 | 50 | 1.161 | 3200 | 2 | 2 | 820 | 220 |
60D-13 | 60 | 1.392 | 3200 | 2 | 2 | | |
80D-13 | 80 | 1.856 | 3200 | 1.5 | 1.5 | | |
120D-13 | 120 | 2.785 | 3200 | 1 | 1 | 820 | 220 |
16.Main technical parameters of D-15
type | Rated zero-power resistance R25 (Ω) | residual resistance under maximum steady-state current at 25ºC (Ω) | B25/85 (k) | Current (A) | Max load capacitance (uf) 120VAC | Max load capacitance (uf) 240VAC | Thermal time constant (s) | Dissipation factor (mw/ºC) | Temperature Range (ºC) | Approvals UL/CUL |
Maximum steady-state current at 25ºC Imax | Iss |
1.3D-15 | 1.3 | 0.0825 | 2700 | 8 | 8 | 1000 | 270 | <90 | >16 | -40 ~ +200 | √ |
1.5D-15 | 1.5 | 0.0843 | 2700 | 8 | 8 | 1000 | 270 |
2.5D-15 | 2.5 | 0.1353 | 2700 | 7 | 7 | 1800 | 470 |
3D-15 | 3 | 0.1363 | 2700 | 7 | 7 | 1200 | 330 |
4D-15 | 4 | 0.1985 | 2700 | 6 | 6 | 1800 | 470 |
5D-15 | 5 | 0.1268 | 2800 | 6 | 6 | 1800 | 470 |
6D-15 | 6 | 0.1882 | 2800 | 5 | 5 | 1800 | 470 |
7D-15 | 7 | 0.1909 | 3000 | 5 | 5 | 1800 | 470 |
8D-15 | 8 | 0.2011 | 3000 | 5 | 5 | 1800 | 470 |
10D-15 | 10 | 0.2087 | 3000 | 5 | 5 | 1800 | 470 |
12D-15 | 12 | 0.2672 | 3000 | 4 | 4 | 1800 | 470 |
15D-15 | 15 | 0.305 | 3200 | 4 | 4 | 1800 | 470 |
16D-15 | 16 | 0.306 | 3200 | 4 | 4 | 1800 | 470 |
18D-15 | 18 | 0.3375 | 3200 | 4 | 4 | 1800 | 470 |
20D-15 | 20 | 0.3466 | 3200 | 4 | 4 | 1800 | 470 |
22D-15 | 22 | 0.3812 | 3200 | 3 | 3 | 1800 | 470 |
25D-15 | 25 | 0.433 | 3200 | 3 | 3 | 1200 | 330 |
30D-15 | 30 | 0.519 | 3200 | 3 | 3 | 1200 | 330 |
33D-15 | 33 | 0.571 | 3200 | 3 | 3 | 1200 | 330 |
40D-15 | 40 | 0.587 | 3200 | 3 | 3 | 1200 | 330 |
47D-15 | 47 | 0.69 | 3200 | 3 | 3 | 1200 | 330 |
50D-15 | 50 | 0.734 | 3200 | 3 | 3 | 1200 | 330 |
60D-15 | 60 | 0.881 | 3200 | 3 | 3 | | |
80D-15 | 80 | 1.175 | 3200 | 2 | 2 | | |
120D-15 | 120 | 1.763 | 3200 | 1.5 | 1.5 | 1200 | 330 |
17.Main technical parameters of D-20
type | Rated zero-power resistance R25 (Ω) | residual resistance under maximum steady-state current at 25ºC (Ω) | B25/85 (k) | Current (A) | Max load capacitance (uf) 120VAC | Max load capacitance (uf) 240VAC | Thermal time constant (s) | Dissipation factor (mw/ºC) | Temperature Range (ºC) | Approvals UL/CUL |
Maximum steady-state current at 25ºC Imax | Iss |
0.7D-20 | 0.7 | 0.1045 | 2700 | 11 | 11 | 2200 | 560 | <135 | >23 | -40 ~ +200 | √ |
1D-20 | 1 | 0.1105 | 2700 | 10 | 10 | | |
1.3D-20 | 1.3 | 0.1312 | 2700 | 9 | 9 | 2200 | 560 |
2.2D-20 | 2.2 | 0.1292 | 2800 | 8 | 8 | 2200 | 560 |
2.5D-20 | 2.5 | 0.1469 | 2800 | 8 | 8 | 2200 | 560 |
3D-20 | 3 | 0.1519 | 2800 | 8 | 8 | 2200 | 560 |
5D-20 | 5 | 0.1576 | 3000 | 7 | 7 | 2200 | 560 |
6D-20 | 6 | 0.1891 | 3000 | 6 | 6 | 2200 | 560 |
8D-20 | 8 | 0.1981 | 3000 | 6 | 6 | 2200 | 560 |
10D-20 | 10 | 0.21 | 3000 | 6 | 6 | 2200 | 560 |
12D-20 | 12 | 0.2133 | 3200 | 5 | 5 | 2200 | 560 |
16D-20 | 16 | 0.2216 | 3200 | 5 | 5 | 2200 | 560 |
20D-20 | 20 | 0.277 | 3200 | 4 | 4 | | | |
30D-20 | 30 | 0.4157 | 3200 | 4 | 4 | | | |
33D-20 | 33 | 0.4495 | 3200 | 4 | 4 | | | |
60D-20 | 60 | 0.8172 | 3200 | 4 | 4 | | | |
18.Main technical parameters of D-25
type | Rated zero-power resistance R25 (Ω) | residual resistance under maximum steady-state current at 25ºC (Ω) | B25/85 (k) | Current (A) | Max load capacitance (uf) 120VAC | Max load capacitance (uf) 240VAC | Thermal time constant (s) | Dissipation factor (mw/ºC) | Temperature Range (ºC) | Approvals UL/CUL |
Maximum steady-state current at 25ºC Imax | Iss |
0.7D-25 | 0.7 | 0.0581 | 2700 | 13 | 13 | | | <160 | >27 | -40 ~ +200 | |
1D-25 | 1 | 0.0831 | 2700 | 11 | 11 | | | |
1.3D-25 | 1.3 | 0.1078 | 2700 | 10 | 10 | | | |
1.5D-25 | 1.5 | 0.1246 | 2700 | 10 | 10 | | | |
2.5D-25 | 2.5 | 0.135 | 2800 | 9 | 9 | | | |
3D-25 | 3 | 0.162 | 2800 | 9 | 9 | | | |
5D-25 | 5 | 0.153 | 3000 | 8 | 8 | | | |
8D-25 | 8 | 0.2075 | 3000 | 7 | 7 | | | |
10D-25 | 10 | 0.2593 | 3300 | 7 | 7 | | | |
12D-25 | 12 | 0.311 | 3300 | 6 | 6 | | | |
16D-25 | 16 | 0.4148 | 3300 | 6 | 6 | | | |
Address:
Office 408,Baida Center, Guancheng District, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory, Group Corporation
Business Range:
Electrical & Electronics, Industrial Equipment & Components
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, QC 080000
Company Introduction:
Zhengli Group Company Limited is a large group company, founded in 2006. It is dealing with capacitors and resistors, including disc ceramic capacitor (50V~15KV ), film capacitor, ZVR zinc oxide varistor, NTC thermistor, safety capacitor ( Y1, Y2, X1 ), safety capacitor (MKP-X2 ).
Offering Capacitors and Resistors for 10 Years
Founded in 2006, Zhengli group company Limited has several factories and companies. Our main product categories are ceramic capacitor (50V-15KV), film capacitor, ZVR zinc oxide varistor, NTC thermistor, safety capacitor ( Y1, Y2, X1 ), safety capacitor (MKP-X2 ). Our products are widely used on electronic products, such as large or small household electric appliances, power supplies, chargers, communication equipment, computers and peripherals, and lighting appliances.
Large Monthly Capacity to Complete Volume Orders Rapidly
We own 17 automatic production lines and have developed a three-stage production line for AC ceramic capacitors (Y type) by ourselves. Our automatic production is ahead of most manufacturers in mainland China, producing 20 million AC ceramic capacitors (Y1/X1, Y2/X1), 5 million AC film capacitors (MKP-X2), 5 million metallized film capacitors, 5 million ZVR zinc oxide varistor & NTC thermistor and 5 million high-, medium- and low- dielectric ceramic capacitors each month. Because of our hard work, we have obtained three innovation patents and 13 utility patents.
Meeting International Standards like UL and VDE
We have a complete range of certifications regarding product safety, environmental protection and company management. For safety, we have UL, cUL, VDE, ENEC, CQC, SEV, SEMKO, NEMKO, DEMKO, and FIMKO approvals. Our company is also ISO 9001: 2008- and ISO 14001: 2004-certified. Based on QC 080000: 2005 regulations, we have established a Hazardous Substance Process Management System to restrict hazardous substances. All of our products are compliant with the RoHS and REACH Directives plus our ceramic capacitors are free of halogens, phthalates and polynuclear aromatic hydrocarbons. They have been approved by GB (China) and IEC as well.
Contact us now to see how Panasonic, Samsung, Vtech, TCL and Atech are benefiting from us.